Active Speed Sensor based on Hall Effect sensing principle to work in harsh environment for speed monitoring of Traction Motor. Active Speed Sensor senses the toothed iron wheel having 120 teeth to be mounted on Traction Motor Shaft.
Technical Features
Sensors and its processing circuits are encased in metallic (Aluminium) housing and sealed properly confirming to IP68 protection class.
Sensor is protected against short-circuit, over voltage and reverse polarity.
Based on Hall effect sensing principle it provides very accurate measurement of Traction Motor speed almost from 0 speed to 3000 RPM.
Two galvanically isolated Speed pulse signal.
Replacement of WIEGAND Type speed sensor.
Applications
Measured speed signal is used for calculation of Locomotive speed in order to activate the speed limit for constant speed control & for the adhesion control during starting and braking and to manage the effectiveness of Wheel Slip Control.
Output signal options:
- 2 galvanically isolated pulse of 25±5 micro second width & amplitude of 2V±0.5V peak
- Two open collector out put pulses at 90° Phase difference
Motor movement direction sensing
Direction sensing options:
- Speed signal polarity
- Phase difference between two output pulses
Input & output connections
Power supply: 3 pin ITT Circular Connector
Speed signal: 5 pin ITT Circular Connector
Redundancy of Circuits.
Hall sensors & processing unit, Power supply (optional)
Operating Temp. range
-25°C to 70°C
Protection
Against reverse polarity, short circuit and over voltage